LET US HELP YOU GROW
TABLE OF CONTENTS
< All Topics
Print

Bulb replacement 1000W and 1000-1250W

Posted10 maart 2023
Updated24 mei 2023
ByDimlux
always wear rubber gloves while handling the bulb!
unlatch and unscrew both covers to expose lamp fittings 
Slide both fittings fully open, as shown
Make sure both sliders are in the fully-open position.
Remove the lamp
Before placing the new lamp, make sure the contact wire is straight, the getter is on the ballast side, and the text on the lamp is facing out.

Insert lamp and push into place
Make sure the contact wire from the lamp is straight between the contact plates inside the fitting

Slide the fittings firmly inwards

Make sure the fitting is fully closed
always wear rubber gloves while handling the bulb!