LET US HELP YOU GROW
-
DIMLUX XTREME SERIES LED
-
- Articles coming soon
-
- Articles coming soon
-
- Articles coming soon
-
- Articles coming soon
-
DIMLUX XPLORE SERIES
-
DIMLUX EXPERT SERIES MKII
-
- Installation Dimlux Expert Series MKII (without Maxi Controller)
- Installation Dimlux Expert Series MKII (With Maxi Controller)
- Install up to 160 Dimlux Expert Series MKII (With Maxi Controller)
- Fixture Spacing
- Mounting the fixture
- Ultra Optics Reflector
- Reflector Adjustment (only for the Ultra Optics Hybrid 98)
- Add-on Reflectors (Wings)
-
DOWNLOAD MANUALS & TUTORIALS
TABLE OF CONTENTS
< All Topics
Print
RCD – RCBO requirement
Posted24 mei 2023
Updated24 mei 2023
ByDimlux
When local code requires a RCD or RCBO in the electric circuit, the device should trip at a differential current of 0,3A.
When local code requires a RCD or RCBO of 0,03A, a maximum of 6 fixtures can be connected in 1 circuit. Use a second RCD or RCBO for the next 6 fixtures.
Warning!
- Make sure mains power is switched off.
- Ensure the cord is not coiled and does not touch any hot surfaces.
- Connect the cables according to local rules, safety regulations and electrical code.
- Ensure external switching gear can cope with the inrush current of the LED fixture. Always use a double pole contactor suitable for switching a capacitive load. Never use household timers to switch the LED fixture!